Model 100 Specifications
The model 100 Inmate-visitor Telephone system consists of pairs of telephone handsets connected to splitter isolation networks at each conversation location. Power is supplied to the splitter-isolation networks from a wall –mounted power box. Following are specifications:
Telephone handsets
Black, caps sealed with Epoxy, with security fitting to prevent vandalism and contraband passage.
Armored cables
Highest quality, with 350 pound test rating.
Each handset contains a tamper-resistant hearing aid compatible receiver, as well as a tamper-resistant, high output transmitter with the following specifications:
Telephone handsets
Black, caps sealed with Epoxy, with security fitting to prevent vandalism and contraband passage.
Armored cables
Highest quality, with 350 pound test rating.
Each handset contains a tamper-resistant hearing aid compatible receiver, as well as a tamper-resistant, high output transmitter with the following specifications:
Receivers
Vandal resistant cover designed for payphone and corrections environment.
1. Type: Moving coil
2. Response Range: 300-3300 Hz
3. Sensitivity: 101±3 dB SPL at 1 KHz.
4. Impedance: 170±30 ohm at 1 KHz.
5. Insulation Resistance: At least 50M ohm at 250v D.C.
6. Hearing Aid: Conform to RS-504
7. ESD: No problem at 15KV (P801-2,IEC)
8. Weight: 68.5 grams
9. Dimension: 45±0.3x20±0.5mm
Note spacing of holes in receiver offset from those in receiver cap, to prevent vandalism.
1. Type: Moving coil
2. Response Range: 300-3300 Hz
3. Sensitivity: 101±3 dB SPL at 1 KHz.
4. Impedance: 170±30 ohm at 1 KHz.
5. Insulation Resistance: At least 50M ohm at 250v D.C.
6. Hearing Aid: Conform to RS-504
7. ESD: No problem at 15KV (P801-2,IEC)
8. Weight: 68.5 grams
9. Dimension: 45±0.3x20±0.5mm
Note spacing of holes in receiver offset from those in receiver cap, to prevent vandalism.
Transmitters
Transmitters are high-output units designed to minimize background and ambient sounds so as to provide maximum intelligibility in noisy environments. Vandal-proof metal cover designed for payphone and corrections environment
Carbon Granule
1. Response Range: 300-4500 Hz
2. Movable Resistance: 35-95 ohm at 50mA D.C. (RS-470)
3. Self Generated Noise: Less than 15 dBmc (2500 Tel. RS-470)
4. Weight: 31.5 grams
5. Dimension: 45.8±0.2x14.5±0.5mm
Note perforations offset so as to prevent vandalism
Carbon Granule
1. Response Range: 300-4500 Hz
2. Movable Resistance: 35-95 ohm at 50mA D.C. (RS-470)
3. Self Generated Noise: Less than 15 dBmc (2500 Tel. RS-470)
4. Weight: 31.5 grams
5. Dimension: 45.8±0.2x14.5±0.5mm
Note perforations offset so as to prevent vandalism
Splitter-Isolation Networks
Splitter-Isolation networks consist of a proprietary electrical network mounted on a barrier strip housed in a 4-inch standard 1900 style electrical box. The box has cutouts for ½ and ¾ inch conduits. The edges are rounded for safety. Compression fittings are supplied to attach the telephone armored cable to the box.
The splitter-isolation networks provide 80 dB of isolation between adjacent conversations. An open or shorted handset will have no effect on the operation of the rest of the system due to the network’s protection.
Hanger Brackets
Chrome, two-piece, designed to secure handsets under varying conditions.
Power Boxes
Power boxes are 12” x 12” x 4” surface-mounted cabinets containing two power supplies, each capable of supplying 13.8 volts D.C. at 3 Amps.
Model 100 System
The System is supplied complete with security fittings for where the inmate handset goes through the partition. A dual-conductor power wire is also supplied.
Call (201) 664-8333 for assistance in configuring your Model 100 System. Or email us at [email protected]
Splitter-Isolation networks consist of a proprietary electrical network mounted on a barrier strip housed in a 4-inch standard 1900 style electrical box. The box has cutouts for ½ and ¾ inch conduits. The edges are rounded for safety. Compression fittings are supplied to attach the telephone armored cable to the box.
The splitter-isolation networks provide 80 dB of isolation between adjacent conversations. An open or shorted handset will have no effect on the operation of the rest of the system due to the network’s protection.
Hanger Brackets
Chrome, two-piece, designed to secure handsets under varying conditions.
Power Boxes
Power boxes are 12” x 12” x 4” surface-mounted cabinets containing two power supplies, each capable of supplying 13.8 volts D.C. at 3 Amps.
- Electronic overload protection with auto reset
- Input: 115V AC, 60Hz, 50W
- 3 Amp continuous 4 Amp peak
- Screw terminal connectors
- Short circuit protection
- Fuse protected
- Anti-skid rubber feet
- Heavy duty chassis
- Output: 13.8V DC
- Heat sink
Model 100 System
The System is supplied complete with security fittings for where the inmate handset goes through the partition. A dual-conductor power wire is also supplied.
Call (201) 664-8333 for assistance in configuring your Model 100 System. Or email us at [email protected]